95mm FPV Quadcopter Drone Kit with 1104 Motors, F4 Flight Controller, 12A ESC (3-4S) (Kit)

Frame Specifications:

• Wheelbase: 95mm
• Weight: about 20.5g (without protective ring weight) with protective ring weight: about 33g)
• Body bottom plate thickness: 2.0mm
• Upper board thickness: 1.5mm
• The height inside the rack: 28 mm
• Color of propeller guards: red
• Recommended Motor: 1104 1106 1204 1206
• Camera mounting hole position; 19*19
• Motor mounting holes: 9*9
• Flight control mounting holes: 16*16 (M3) and 20*20 (M2).

F4 Noxe Flight Controller Specifications:

• Model: F4 NOXE V3
• Main control (MCU): STM32F411CEU6/100 MHz
• Sensor: BMI 270/Gyro/Accel
• Video Overlay (OSD): AT7456E
• Barometer (Baro): Yes (Deluxe version only)
• Black Box (Black Box): 16MB (Deluxe Edition only)
• Input voltage: Input voltage: 2S-6S (7.4V-26V)
• 5V-BEC: 5V/2.5A ± 0.1V
• 10V-BEC: 10V/2A+0.1V
• Compatible Receivers (receivers): ELRs (CRSF), TBS (CRSF), SBU, IBU, DS M2, DS MX
• HD interface: yes
• UART: UART 1, UART 2
• LIC: IIC1
• LED strip: yes
• Buzzer (buzzer): support 5V active
• ESC signal (ESC signal): PWM, Oneshot125, Oneshot42, Multishot,
• Dail 150, Dail 300, Dail 600
• USB: Micro USB
• Current terminal] (current port): Yes
• Voltage sensor (voltage sensor): Yes
• Dfu button (dfu button): Yes
• Firmware (Firmware): Betaflight_4.3.0 JHEF 411.HEX
• Size: 27*27*5mm
• Mounting hole: 20*20*3mm
• Weight (weight): 4.3g

Power Distribution Board Specifications:

• Input Voltage: 2-6S
• Maximum current : 3A BEC
• Weight: About 6.5g
• Size:36mm*36mm / 30.5x30.5mm Mounting
• Suitable for: RC Drones / Hobby / Maker Electronics
• Characteristic: With two BEC output, 5V and 12V ,Comes with AUX switch

Motor Specifications:

• Stator diameter: 11mm
• Stator thickness: 6mm
• Stator arms: 9
• Stator poles: 12
• KV: 4000KV
• No load current (11.1V): 1A
• Motor resistance: 13mΩ
• Max continuous current: 15A
• Max continuous power: 110W
• Diameter: 14.2mm
• Height: 13.6mm
• Voltage: 3-4S
• Support ESC: 15-20A
• Recommended propeller: 2034x4 or 3020x2
• Weight: 7.6g/each (including wire)

ESC Specifications:

• Continuous Current: 12A
• Burst Current: 15A (10S)
• Battery: 2-4S
• BEC Output: 1A 5V
• Size: 45 x 18mm (Excluded cable)
• Color: Black

Package Contents:

• 1x 95mm Frame Kit
• 4x 1106 Motor with Screws
• 1x 5v 12v PDB
• 1x F4 Noxe Flight Controller
• 4x CW Propeller
• 4x CCW Propeller