- Home / Radio Receiver /
- Mini Micro 3G DSM2 4 Channel Receiver 2.4GHz 3.6-10V 3G DX6I DX7/8/9 D
Mini Micro 3G DSM2 4 Channel Receiver 2.4GHz 3.6-10V 3G DX6I DX7/8/9 DSX11
Sold Out
Product Type: Radio Receiver
Brand: SpeedyFPV
Channels: 4 Channels
Frequency: 2.4GHz
Protocol: DSM2
Receiver Output: PPM
Brand: SpeedyFPV
Channels: 4 Channels
Frequency: 2.4GHz
Protocol: DSM2
Receiver Output: PPM
Step 1 - - Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate.
Step 2 - - To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter.
Step 3 - - Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now.
Step 4 - - Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.
Features:
- Preset failsafe system
- Compatibility (Spektrum,JR,DSM2): DX6I,DX7,DX8,DSX7,DSX9 DSX11
Specifications:
- This is not a Spektrum DSM2/X product, nor is it a copy of a Spektrum DSM2/X product.
- Band: 2.4GHz
- Channel: 4CH
- Modulation: DSM2
- Dimensions (L xWx H): 29x16x7mm
- Weight: 3g
- Voltage Range: 3.6-10v
- Antenna Length Main RX: 29mm