Combo: Antennas Included
Combo: Camera Included
Combo: Goggles Included
Combo: Video Transmitter Included
If you're looking to get FPV ready with one of your drones, look no further than this kit as it includes some great features that make it stand out! This kit offers a stand-alone FPV monitor with built in 40 channel receiver, audio, and internal battery, the video transmitter is designed to mount easily inside your drone, and the system offers crisp, clear and vivid images in daylight, while still being able to view objects without difficulty under low light.
Simple Install - Included is everything you'll need to get up and running with a live, reliable, static free video feed. Minimal installation work helps eliminate complicated wiring and issues that can arise from signal interference in the system.
Matched Equipment - Each piece of this kit has been designed and tested to perform well together, eliminate any guesswork from your setup. The antennas are matched to provide the best coverage and highest reliability of your video signal, the camera and transmitter are matched to give you a crisp clear image in daylight and low light situations, and the monitor is compatible across all channels of the video transmitter.
Racer Ready - Many different FPV races place restrictions on the channels and output power contestants are allowed to use, and this equipment won't get you disqualified. Be aware that much video equipment available can have you causing undesired interference.
Reliability - The equipment is tested and sourced from trusted manufacturers, you can rest assured that when it counts, your equipment won't fail you. If properly installed, the video equipment can be run worry free and you can enjoy all that FPV flight has to offer.
Modular - Modular design means that you won't have to replace your entire setup when changing one component. In a crash, the transmitting equipment has been tested to withstand hard shocks without breaking, and all systems can support an OSD being installed. Additionally, the FPV goggles included is of high quality, and can be used with nearly all video transmitters, even those not identical to the one in this kit.
HGLRC XJB-ELF CCD Camera Specifications:
- Model: HGLRC XJB-ELF Camera V2
- Weight: 5.5g
- Dimensions: 19x19x19mm
- Usage: for 120mm-290mm racing drone
- Input Voltage: 5-36V
- Horizontal Resolution: 600TVL
- Lens: 2.3mm
- FOV: 120-degree
- S/N Ratio: >60dB(AGG OFF)
- ESS: PAL:1/50~100,000, NTSC: 1/60~100,000
- AutoGain Control(AGG): YES
- Back Light Compensation (BLC): YES
- Min. Illumination: 0.01Lux/1.2F
- WDR: D-WDR
- DNR: 2DNR
- Day/Night: Color/Auto/B&W
HGLRC TX20 V2 FPV Video Transmitter Specifications:
- Input Voltage: 7-26V
- Stable Output Power: 25/100/200/350mW
- Channels: 40Ch
- Self-test output power function.
- Weight: 2.4g
- Usage: for 90-290mm FPV racing drones
EV100 Goggle Display Specifications:
- Resolution : 720*540
- FOV : 28° diagonal
- IPD : 58-68mm
- Ratio : 4:3
- Focal length adjusting: under 400 degree of myopia and hyporopia 150 degree
EV100 Goggle Features:
- Support AV Input and Output
- Support External HDMI to AV Module
- Support External DVR module
- Single receiver with Dual Antennas, enhance the reception and stable performance.
- With Fan, can defog the glasses for good visual experience.
- Adjustable focal length,allows pilots under 400 degree myopia view directly via naked eye
- Adjustable IPD 58~68mm
- Auto Search function, can auto search all frequencies and select the channel of stongest signal.
- Has 3 Racing Modes : 4/6/8 pilots. 60-80MHz interval between adjacent channels greatly decrease interference.
- Has Debug Mode, requires a corresponding VTX which support pitmode and extra frequency 5300MHz
EV100 Goggle Specifications:
- Frequency : 5.8G 5333Mhz-5945Mhz
- Sensitivity : <=-93dB
- Antenna Impedance : 50Ω
- Antenna Gain : 3dBi
- Antenna Connector : RP-SMA
- Video Formate : NTSC/PAL
- Support AV IN/OUT
- Support Focal Length/Brightness/Contrast Adjustment
- Suport Firmware Upgrading
- Power Input : 7.4V
- Low Voltage : 6.8V
- Battery : 2S 7.4V 1000mAh
- Charging : USB Cable(not included)
- Working Temp. : -10℃-+40℃
- 1x EV100 5.8G FPV Goggles
- 1x HGLRC ELF 600TVL CCD Micro Camera (19x19mm mounting)
- 1x HGLRC TX20.V2 25-350mW Video Transmitter
- 1x User Manual