SpeedyFPV
  • Log in
  • Create Account
  • My Cart (0)
  • Checkout
  • Drone Kits
    • Brushless Drone Kits
    • Brushed Drone Kits
    • Ready-to-Fly Models (RTF)
  • Electronics
    • Brushless Motors
    • Brushed Motors
    • ESCs (Speed Controllers)
    • ESC/Motor Combos
    • Flight Controllers
    • Flight Controller/ESC Combos
    • GPS
    • Power Distribution Boards
    • Radio Controllers
    • Radio Transmitters
    • Radio Receivers
    • Sensors & Modules
    • Voltage Regulators
  • FPV Equipment
    • Antennas
    • Coaxial Connectors
    • Cameras
    • Camera & Transmitter
    • Complete FPV Kits
    • FPV Goggles
    • FPV Monitors
    • Gimbals and Gimbal Accessories
    • Monitor Mounts
    • OSD Modules
    • Video Transmitters
    • Video Receivers
  • Frames & Accessories
    • Drone Frames
    • Landing Gear
    • Motor Mounts
    • Propellers
    • Radio Accessories
    • Accessories
  • Batteries
    • LiPo Batteries
    • Chargers & Accessories
    • Charging Cables
    • Battery Connectors
    • Battery Holders
  • Electrical
    • Buzzers
    • Cables & Leads
    • Capacitors
    • Connectors
    • DC Fans
    • LED Lights
    • Servos
    • Soldering Tools
    • Switches
    • Wire
  • Hardware & Materials
    • Ball Bearings
    • Carbon Fiber Products
    • Fiberglass Panels
    • Honeycomb Composite
    • Fiberglass Fabric
    • Screws & Nuts
    • Standoffs & Spacers
    • Tube Clamps
    • Wire
    • Liquid Silicon Pigment
  • Tools & Repair
    • Cutting & Milling Tools
    • Jigs & Clamps
    • Replacement Parts
    • Soldering Tools
    • Tools & Work Accessories
  • Home
  • / FPV System /
  • Racing Drone FPV Kit with EV100 5.8G Goggles 25/200/600mW Transmitter
Racing Drone FPV Kit with EV100 5.8G Goggles 25/200/600mW Transmitter Camera +++

Added to Cart
Product Type: FPV System
Brand: SpeedyFPV
Combo: Antennas Included
Combo: Camera Included
Combo: Goggles Included
Combo: Video Transmitter Included
If you're looking to get FPV ready with one of your drones, look no further than this kit as it includes some great features that make it stand out! This kit offers a stand-alone FPV monitor with built in 40 channel receiver, audio, and internal battery, the video transmitter is designed to mount easily inside your drone, and the system offers crisp, clear and vivid images in daylight, while still being able to view objects without difficulty under low light. 

EV100 5.8GHz FPV Goggle Features:
  • Support AV Input and Output
  • Support External HDMI to AV Module
  • Support External DVR module
  • Single receiver with Dual Antennas, enhance the reception and stable performance.
  • With Fan, can defog the glasses for good visual experience.
  • Adjustable focal length,allows pilots under 400 degree myopia view directly via naked eye
  • Adjustable IPD 58~68mm
  • Auto Search function, can auto search all frequencies and select the channel of stongest signal.
  • Has 3 Racing Modes : 4/6/8 pilots. 60-80MHz interval between adjacent channels greatly decrease interference.
  • Has Debug Mode, requires a corresponding VTX which support pitmode and extra frequency 5300MHz

EV100 5.8GHz FPV Goggle Specifications:
  • Frequency : 5.8G 5333Mhz-5945Mhz
  • Sensitivity : <=-93dB
  • Antenna Impedance : 50Ω
  • Antenna Gain : 3dBi
  • Antenna Connector : RP-SMA
  • Video Formate : NTSC/PAL
  • Support AV IN/OUT
  • Support Focal Length/Brightness/Contrast Adjustment
  • Suport Firmware Upgrading
  • Power Input : 7.4V
  • Low Voltage : 6.8V
  • Battery : 2S 7.4V 1000mAh
  • Charging : USB Cable(not included)
  • Working Temp. : -10℃-+40℃

EV100 5.8GHz FPV Goggle Display Specifications:
  • Resolution  : 720*540
  • FOV : 28° diagonal
  • IPD : 58-68mm
  • Ratio : 4:3
  • Focal length adjusting:  under 400 degree of myopia and hyporopia 150 degree

5.8G 48CH 25/200/600mW Adjustable AV Transmitter  Features:
  • Clean powerup and channel switching without interference to others
  • Beltflight/Cleanflight/iNav OSD setting of power,bands,channels and Pitmode
  • Overheating protection in case of premature damage.
  • Additional protection allows for powering up without antenna
  • Pitmode(power is set to OFF) - test and set your quad without interference to others
  • Channel changes and Pitmode setting through PWM
  • 2-6S input power supported
  • 5V BEC output for camera,RC receiver
  • 36x36 mm Standard size ; 30.5x30.5 mm mounting holes

5.8G 48CH 25/200/600mW Adjustable AV Transmitter  Specifications:
  • Model: EWRF E709TM3
  • Frequency: 5.8G 48CH
  • Transmitting Power: 25mW/200mW/600mW/OFF
  • Power supply: DC 6-25V (2-6S)
  • Supply current12V: 140mA@25mW /250mA@200mW /300mA@600mW
  • Power output: DC 5V (800mA max)
  • Antenna impedance: 50 ohm
  • Antenna connector:MMCX Female( RP-SMA Male Pigtail)
  • Weight: 8 g
  • Dimension: 36*36*7.65 mm
  • Mounting Hole: 30.5mmx30.5mm

HD NTSC Camera Specifications:
  • Resolution: 700TVL
  • Signal: Analog NTSC
  • Mounting: Standard

Package Contents:
  • 1 x EV100 5.8G 72CH FPV Goggles
  • 1 x 700TVL FPV Camera
  • 1 x E709 5.8G Video Transmitter
  • 1 x 5.8G 4dBi Clover Antenna Set
  • 1 x 7.4V 1000mAh Battery
  • 2 x RP-SMA 3dBi Antenna
  • 1 x User Manual

FAST SHIPPING
AWESOME PRICES

© 2021 SpeedyFPV.com All Rights Reserved.
    |
  • About US
  • |
  • FAQ
  • |
  • Contact Us
  • |
  • Disclaimer
  • |
  • Returns
  • |
  • Privacy
  • |