X95 Micro Brushless Quadcopter Drone Kit F4 Tower Configuration
Sold Out
X95 Frame Specifications:
- Arm thickness: 2.0MM
- Upper board: 1.0MM
- Weight: about 38 grams (with protective ring)
- Paddle: up to 2 inches
- Camera installation space: 19MM/21mm
- Support Camera：Foxeer and Caddx camera
- Flight control installation: standard 20mm x 20mm
- 3D print: red or black
- Propeller protection ring: transparent red
- Wheelbase 95MM
- 2 inches
Flytower F4 Flight Controller with OSD Specifications:
- This board provides all the features, weighs only 8g, fixed hole for the 20MM ( M2.5 hole )
- For four-axis models tailored, built-in LC filter, support BF firmware
- Support 2-4S power input
- Built-in 5V 1A output BEC
25A 4-in-1 ESC Specifications:
- Input voltage: 2-4S LiPo/2-4S HV LiPo
- BEC: OPTO (none)
- Single ESC Constant working current: 25A (maximum current:30A 5 seconds)
- Four-in-one ESC size: 31*33.5mm (including pad and protruding point maximum size)
- Four-in-one ESC weight: 4.9g
- Firmware: BLHELI_S
- Support DSHOT600, DSHOT300, Dshot150, Oneshot125, Multishot, PWM
- Processor: SILABS EFM8BB21F16G
- Mos: AON7202
- Driver: A new generation of three-in-one MOS driver
FE200T Transmitter Features:
- Fast 3-speed power switching, independent two red indicators, indicating the current transmitting power of 25/100/200MW
- The frequency point uses 4*3 LEDs to display values
- Supports OSD remote tuning (IRC Tramp), supports PIT mode tuning-accessed through OSD
- Antenna uses IPEX interface, reducing the footprint of the PCB board.
- Small size: 16.5mm * 16.5mm, mounting hole M1.
- Lightweight: 1.7g
FE200T Transmitter Specifications:
- Input voltage: DC 4.5-5.2V
- Input current: 200MW = 400 MA
- Power switching: third gear 25MW, 100MW, 200MW
- Frequency switching: manual button / OSD (IRC Tramp) (simultaneous support)
- Antenna interface: IPEX
D1103 Brushless Motor Specifications:
- Size: 1103
- kV: 10000kV
- No Load Current: 1.5A Max
- Motor Resistance: 0.165 ohms
- Weight: 3.5g
- Propeller Shaft Diameter: 1.5mm
- Propeller Shaft Length: 5.3mm
- Outside Diameter: 14.2mm
- Recommended Propeller: 1735/1935/2030/3020
Package Contents:
- 1 x X95 Carbon Fiber Frame
- 1 x F4 Flytower Flight Controller with OSD
- 1 x 25A 4-in-1 ESC
- 4x D1103 Brushless Motors
- 1 x 700TVL Camera
- 1 x FE200T Transmitter
- 1 x 5.8Ghz RHCP UFL Antenna