HappyModel BNF Moblite6 1S 75mm Brushless Analog Whoop - SPI Frsky BNF

Ultimate Whoop Experience: The HappyModel BNF Moblite6 and Moblite7 are designed to deliver the ultimate whoop experience. With their 1S 75mm brushless setup, these tiny drones offer exceptional power and agility, making indoor and outdoor flying a blast.

Ready-to-Fly (RTF) Convenience: Both the Moblite6 and Moblite7 come as Bind-and-Fly (BNF) models, pre-configured with SPI Frsky receivers, saving you time and effort during setup. Simply bind your transmitter, and you're ready to explore the skies in no time.

Small Size, Big Performance: Despite their compact size, the Moblite6 and Moblite7 pack a punch in terms of performance. Their brushless motors and high-quality electronics ensure a stable flight and precise control, allowing you to perform impressive acrobatics with ease.

Durable and Crash-Resistant: Built to withstand crashes and tumbles, these whoops are constructed with durable materials, including protective frames and propeller guards. Enjoy worry-free flying sessions, knowing your drone is resilient enough to handle occasional mishaps.

Versatile FPV Fun: Whether you're an FPV beginner or an experienced pilot, the Moblite caters to all skill levels. Their analog FPV system provides real-time video feedback, allowing for thrilling FPV flights and immersive racing experiences, all while enjoying a crystal-clear view through compatible goggles.

The lightest 1s 65mm brushless whoopPowerful and efficiency lightest 1s AIO 5IN1 F4 flight controller new Unibell EX0802 brushless motorsVTX power switchable 25mw~200mwLow profile Canopy design

Specifications:

• Brand Name: Happymodel
• Item Name: Moblite6 1S 65mm ultra-light brushless whoop
• Wheelbase: 65mm
• Size: 80mm*80mm*25mm
• Weight: 18.5g (without battery)
• Motor

EX0802 19000KV Motors Specifications:

• Configuration:9N12P
• Stator Diamter:8mm
• Stator Length:2mm
• Shaft Diameter:Φ1mm
• Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
• Weight(g):1.7g
• No.of Cells(Lipo):1S only

Flight Controller Specifications:

• (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4F
• MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: MPU-6000(SPI connection)
• Original whoop size compatible
• Power supply: 1S battery input (DC 2.9V-4.35V)
• Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
• Built-in Betaflight OSD(SPI Control)
• Built-in 5.8G VTX
• Built-in SPI Frsky/Flysky receiver
• Built-in 5V 1A BEC

Onboard 4-in-1 ESC Specifications:

• MCU upgraded to EFM8BB21
• Power supply: 1S LiPo/LiPo HV
• Current: 5A continuous peak 6A (3 seconds)
• Support BLHeliSuite programmable
• Factory firmware: O_H_50_REV16_8.HEX
• Default protocol: DSHOT600

Onboard Frsky SPI D8 Receiver Version Specifications:

• SPI BUS receiver Frsky D8 compatible
• Compatible Non-EU transmitter D8 model
• Channels: 8ch
• Failsafe support
• No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

Onboard 5.8GHz VTX Specifications:

• Output power: 25mw~200mw switchable
• Frequency: 40CH
• Input voltage: 3.3V 5.5V
• Current consumption: 300mA(type)
• Frequency: 5.8GHz 5bands 40 channels(include Race band)
• Smart audio ready

Runcam Nano 4 Lite Specifications:

• Model: RunCam Nano4 Lite
• Image Sensor: 1/3" CMOS
• Horizontal Resolution: 800TVL
• Lens : 2.1mm(M8) FOV 160°
• Signal System: PAL/NTSC Non-Switchable
• S/N Ratio: >50dB
• Electronic Shutter Speed: Auto
• Auto Gain Control (AGC): Auto
• Min. Illumination: 0.01Lux@1.2F
• D-WDR: Auto
• Day/Night: Color
• Power:DC 3-5.5V
• Current: 170mA@5V 180mA@3.3V
• Housing Material: ABS
• Net Weight: 1.0g
• Dimensions: L14mm*W12mm*H9mm

Package Contents:

• 1 x Moblite 6 RTF Drone
  
• 1 x Propeller disassemble tool
• 1 x Screwdriver
• 1 x Happymodel Carry case