F550 Hexacopter Drone Kit Noxe F722 Flight Controller 30A ESC 2212 Motors Remote

 This F550 hexacopter package includes everything needed to assemble a powerful 550-class drone for fun or photography. Each kit includes the frame, motors, electric speed controllers, power distribution board, power hookup cables with bullet connectors, and flight controller.

This is a time-tested and proven platform for aerial craft. This version of the F550 features integrated PCB connections for direct soldering of your ESCs. This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy. The V3 also comes with stronger molded arms over V1 and V2, so no more arm breakage at the motor mount on a hard landing.

2212 1000KV 3S Brushless Motor Specifications:

• KV: 1000
• Operating Voltage: 2-3S
• Recommended Prop: 1045
• Load Current (@11.1V): 15A
• Pull (@11.1V): 885g
• Efficiency (@11.1V): 5.1g/w
• Weight: 47g

Evolution Pro Transmitter Features:

• AFHDS 2A RF protocol
• Compatible with the iA6, iA6B, iA6C, iA10B range of receivers
• 8 channel 2.4ghz radio with telemetry capability
• i10 style customized Gimbals with dual ball bearing supports
• Illuminated gimbals (adjustable) with stiffer springs
• Soft rubber grips
• Easy-to-use touchscreen
• SBUS/IBUS and CPPM/PWM support
• 20 Model Memory
• Backlit LCD Screen
• 4 Stick Mode Selection
• USB port for Flight Simulators
• USB charging
• Lanyard attachment point
• Haptic Feedback and louder buzzer
• Range test

JHEMCU F722 NOXE Flight Controller Specifications:

• Model: F722 NOXE
• Main Control: STM32F722RE (216MHZ)
• Gyroscope: ICM-42688-P
• Barometer: DPS310
• OSD Chip: AT7456E
• Black Box: 16MB
• LED Programming: supported
• BB Sound: supported
• Input Voltage: 3-6S
• I2C Interface: supported
• BEC: 5V/2.5A
• BEC: 10V/2.0A
• Camera Input: supported
• USART: UART1, UART2, UART3, UART4, UART5, UART6
• Receiver: ELRS(CRSF),TBS(CRSF) ,SBUS,IBUS,DSM2,DSMX
• GPS: YES
• Compass: YES
• HD O3: YES
• ESC Signal: Dshot150,Dshot300,Dshot600
• USB: TYPE-C
• Current Port: YES
• Voltage Sensor : YES
• DFU Button: YES
• Weight: 5g
• Flight Control Firmware: Betaflight_ 4.4.2_ JHEF7DUAL. HEX
• Installation Hole Spacing: 20MM * 20MM * 4MM
• Maximum Overall Size: 29MM * 29MM

F550 V3 450mm Quadcopter Drone Frame with Integrated Power Distribution Features:

• Built from quality glass fiber and polyamide nylon.
• Integrated PCB connections for direct soldering of your ESCs
• Pre-threaded brass sleeves for all of the frame bolts.
• Colored arms for orientation to keep you flying in the right direction.
• Large mounting tabs on main frame bottom plate for easy camera mounting.
• Easy assembly.

F550 V3 550mm Quadcopter Drone Frame with Integrated Power Distribution Specifications:

• Width: 550mm
• Height: 55mm
• Weight: 430g (w/out electronics)
• Motor Mount Bolt Holes: 16/19mm

10x4.5 Propellers (Set of 8) Specifications:

• Material: ABS (Acrylonitrile Butadiene Styrene)
• Size: 10 x 4.5 inches
• Compatibility: F450 Quadcopter Frame
• Color: Black + Red
• Quantity: Set of 8 propellers
• Mounting: 5mm
• Efficiency
• Stability
• Noise Reduction
• Application: General-purpose heavy lift efficiency propellers

Package Contents:

• 1x F4 NOXE V3 F411 Flight Controller
• 1x F550 Frame Kit
• 1x Evolution PRO Mode 2 Controller (White)
• 1 x TGY-iA6C Receiver (with leads)
• 6x 2212 1000KV 3S Brushless Motors
• 6x Readytosky 30A Brushless ESCs
• 4x 10x4.5" Propellers Clockwise
• 4x 10x4.5" Propellers Counter-Clockwise
• 1x Power Connector (XT60) Harness
• 1x Flight Controller Wiring Harness
• 1x Wiring Diagram