- Home
- All Products
- ZMR250 FPV Racing Drone Kit Noxe F722 Flight Controller GT2205 Motors
ZMR250 FPV Racing Drone Kit Noxe F722 Flight Controller GT2205 Motors 30A ESCs
Sold Out
Brand: SpeedyFPV
ESC Output: 30A
Flight Controller: F4
Frame Size: 250mm
Motor Size: 2204
This kit from SpeedyFPV meets the demanding needs of today's FPV racing drones, featuring 30A ESCs, a power distribution system, GT2205 motors, and an F722 Noxe flight controller.
Everything you need to build an FPV racing drone drivetrain, this kit is great for beginners and seasoned drone pilots alike. Add FPV components and your choice of the receiver to finish the build!
The lightweight, sleek design paired with powerful ESCs and motors offers excellent performance and handling. This model is sure to excite any flyer with an exceptional thrust-to-weight ratio.
ZMR 250mm Quadcopter Frame Specifications:
- Weight: 164g
- Frame Arm Thickness: 5mm
- Frame Thickness: 2mm
- Material: Carbon Fiber with Aluminum Spacers
- Wheelbase: 250mm*
JHEMCU F722 NOXE Flight Controller Specifications:
- Model: F722 NOXE
- Main Control: STM32F722RE (216MHZ)
- Gyroscope: ICM-42688-P
- Barometer: DPS310
- OSD Chip: AT7456E
- Black Box: 16MB
- LED Programming: supported
- BB Sound: supported
- Input Voltage: 3-6S
- I2C Interface: supported
- BEC: 5V/2.5A
- BEC: 10V/2.0A
- Camera Input: supported
- USART: UART1, UART2, UART3, UART4, UART5, UART6
- Receiver: ELRS(CRSF),TBS(CRSF) ,SBUS,IBUS,DSM2,DSMX
- GPS: YES
- Compass: YES
- HD O3: YES
- ESC Signal: Dshot150,Dshot300,Dshot600
- USB: TYPE-C
- Current Port: YES
- Voltage Sensor : YES
- DFU Button: YES
- Weight: 5g
- Flight Control Firmware: Betaflight_ 4.4.2_ JHEF7DUAL. HEX
- Installation Hole Spacing: 20MM * 20MM * 4MM
- Maximum Overall Size: 29MM * 29MM
GT2205 Brushless Motors (2x CW / 2x CCW) Specifications:
- RPM/V: 2300KV
- Stator Diameter: 22mm
- Stator Length: 5mm
- Shaft Diameter: 4mm
- Idle Current@10V: 0.6A
- Max Continuous Power (180 seconds): 495W
- Max Current (180 seconds): 30A
- Internal Resistance: 65mΩ
- Height: 31.5mm
- Width: 27.9mm
- Shaft diameter: M5
- Motor mount hole size: M3
- Weight: 28 grams
- Battery: 3-4S lipo battery
30A ESCs Specifications:
- Model: 30A-S
- Input Voltage: 2-6S
- Con.Current:30A
- Peak Current(10s):35A
- BEC:NO
- Programming :YES
- Net Weight: 9g
- Size:35x17mm
- Processor: SILABS EFM8BB21F16
Power Distribution Board Specifications:
- BEC Outpur: 5V 12V (3A)
- Input Voltage: 2-6S
- Weight : 6g
Package Contents:
- 1x ZMR250 Classic Frame Kit
- 1x JHEMCU Noxe F722 Flight Controller
- 2 x CCW GT2205 2300KV Brushless Motors
- 2 x CW GT2205 2300KV Brushless Motors
- 1x XT60 Power Connector
- 1x Flight Controller Wiring Harness
- 4x 30A ESCs
- 1x Power Distribution Board
- 1x Wiring Instructions
0