HappyModel CrazyF405HD F405 Flight Controller AIO 12A 4in1 ESC 1-2S w/ ELRS Receiver

HappyModel CrazyF405HD F405 Flight Controller AIO 12A 4in1 ESC 1-2S w/ ELRS Receiver

Sold Out

Product Type: Flight Controller
Brand: Happymodel
Amps: 12A
BEC: Yes
Configuration: All-In-One
CPU: F4
Mounting: 25.5x25.5
OSD: Yes

A flight controller with a built-in Serial ELRS receiver and 4-IN-1 Blheli_S 12A ESC specially developed for Digital HD FPV, which removes the analog OSD chip 7456, optimizes the PCB layout, and supports 1-2S Lipo/LiHV lithium batteries, very Suitable for Digital HD Tinywhoop/Cinewhoop/Toothpick and other small FPV drones. The flight controller uses the F405 chip, supports Betaflight/INAV firmware, has 3 sets of complete UARTs available, and integrates a BMP280 barometer and 8Mbp blackbox, which greatly enhances the playability of the flight controller.

Overall Specifications:

  • Item Name: CrazyF405HD ELRS 1-2S AIO Flight controller
  • Mount size: 25.5mmx25.5mm
  • Weight: 4.8g without power lead wire
  • Firmware target: BetaflightF4
  • Support 1-2s Lipo/LiHV battery


Flight Controller Specifications:

  • MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
  • GYRO Sensor: BMI270 (SPI connection)
  • Mount hole size: 25.5mm*25.5mm
  • Power supply: 1-2S battery input (DC 2.9V-8.7V)
  • Built-in 12A(each) Blheli_S 4in1 ESC
  • Built-in Serial ExpressLRS 2.4GBuilt-in BMP280 Barometer
  • Built-in 8MBp blackbox
  • Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470


Onboard 4-in-1 ESC Specifications:

  • Power supply: 1-2S LiPo/LiPo HV
  • Current: 12A continuous peak 15A (3 seconds)
  • Support BLHeli_S Bluejay firmware
  • Factory firmware: Bluejay ESC V0.19Firmware target: Z-H-30
  • Default protocol: DSHOT300
  • When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200


Onboard 2.4GHz ELRS Receiver Specifications:

  • Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
  • RF Frequency: 2.4GHz
  • Antenna: enameled copper wire 31mm length
  • Telemetry output Power: <12dBm
  • Default firmware version: ExpressLRS V3.0.1
  • Firmware target: HappyModel EP1/2 2400 RX
  • Could update firmware via ExpressLRS configurator


Package Contents:

  • 1x HappyModel CrazyF405HD ELRS 1-2S AIO FC built-in UART ELRS receiver and 12A BLHELI_S ESC


 
>