• Home
    • / Drone Kit /
  • SpeedyFPV 220mm Martian IV GT2205 Motors T20 Flytower Racing Drone Kit

SpeedyFPV 220mm Martian IV GT2205 Motors T20 Flytower Racing Drone Kit

SpeedyFPV 220mm Martian IV GT2205 Motors T20 Flytower Racing Drone Kit

Sold Out

Product Type: Drone Kit
Brand: SpeedyFPV
Amps: 30A
Flight Controller: F4
Motor Size: 2205

Own the skies, not just the park. The Martian-IV 220 mm frame, GT2205 motors, and LDARC T20 stack combine into a rock-solid 5″ daily ripper you can wrench and thrash without breaking the bank.

Why you’ll love it:

  • Pre-matched 2300 KV motors + 30 A stack → reliable on 4-6 S
  • Two full sets of HQProp 5143 props (crash once, keep flying)
  • Room up top for a GoPro or Insta360 if you want juicy footage

Martian IV 220mm FPV Racing Drone Frame Kit (4mm Arm Thickness) Specifications:

  • Weight: 145g
  • Frame Arm Thickness: 4mm
  • Frame Thickness: 1.5mm
  • Material: Carbon Fiber with Aluminum Spacers
  • Wheelbase: 220mm*
  • Recommended Motor: 1806-2204/2205/2306/or similiar*
  • Recommended Camera: 28mm Width (RunCam Eagle II Pro or similar)*
  • Recommended Propeller: 5 Inches*
  • Recommended ESC: 20-50A 2-4S ESC*
  • Recommended Battery: 3-4S 1000-1800mAh 40C(minimum) LiPo battery*

4PCS GT2205 2300kV 3-4S Brushless Motors (2x CW / 2x CCW) Specifications:

  • RPM/V: 2300KV
  • Stator Diameter: 22mm
  • Stator Length: 5mm
  • Shaft Diameter: 4mm
  • Idle Current@10V: 0.6A
  • Max Continuous Power (180 seconds): 495W
  • Max Current (180 seconds): 30A
  • Internal Resistance: 65m ohm
  • Height: 31.5mm
  • Width: 27.9mm
  • Shaft diameter: M5
  • Motor mount hole size: M3
  • Weight: 28 grams
  • Battery: 3-4S lipo battery

T20 Flytower Specifications: Specifications:

  • Input Voltage: 2-4S LiPo
  • Firmware: LDARC_F411
  • Configurator: Betaflight
  • OSD: Betaflight OSD
  • Camera Voltage: 5V
  • Weight: 3.4g
  • Mounting: 20x20
  • Flytower Size: 32x36x20mm

TE30A ESC Specifications: Specifications:

  • Input Voltage: 2-4S LiPo
  • Amps: 30A
  • Amps (Burst): 35A (5 Seconds)
  • Current Ratio: 160
  • Firmware: BLHeli_S DSHOT 600
  • Weight: 6.8g
  • Mounting: 20x20mm

8pcs HQProp 5X4.3X3 Propellers Specifications:

  • Propeller Diameter: 5 Inches
  • Pitch: 4.3
  • Blades: 3
  • Material: Poly Carbonate
  • Weight: 4g
  • Hub Diameter: 13.3mm
  • Hub Thickness: 6.3mm
  • Shaft: 5mm

Package includes:

  • 1x Martian-IV 220 mm carbon frame
  • 4x GT2205 2300 KV Brushless Motors
  • 1x LDARC T20 (F411 FC + 30 A 4-in-1 ESC)
  • 8x HQProp DP5×4.3×3 V2S props (black)
  • 1x Hardware Pack
  • 1x Flight Controller Adapter

Batteries, RX, VTX, and camera sold separately. Basic soldering required.


 
>