BETAFPV Aguila20 Brushless Quadcopter (HD Video)

Aquila20 Brushless Whoop Quadcopter is a 2S brushless whoop available in P1 Air Unit HD VTX or Analog VTX versions. It supports beginner-friendly assisted flight modes and full manual control.

Specifications:

• Versions: Aquila20 P1, Aquila20 Analog VTX
• VTX (Aquila20 P1): P1 Air Unit HD VTX
• VTX (Aquila20 Analog VTX): analog VTX
• VTX Power & Range (Aquila20 P1): 200mW and range above 400m
• VTX Power & Range (Aquila20 Analog VTX): 350mW and range above 200m
• Camera (Aquila20 P1): P1 VTX camera (1/2.9" CMOS)
• Camera (Aquila20 Analog VTX): C04 (1/3" CMOS)
• Wheelbase: 100mm
• Flight Controller: Aquila20 V1.0
• Frame: Aquila20 Brushless Whoop Frame
• Motors: 1103|10500KV motors
• Propellers: Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
• Battery: Aquila20 Exclusive Battery 2S HV 1100mAh
• Battery quantity: 2PCS
• Discharge Rate: 15C
• Discharge Power: 8.74Wh
• Rated Voltage: 7.6V
• Battery Weight: 54.5±1.0g
• Charger: 2S HV Battery Charger and Voltage Tester with BT3.0 Connector
• Remote Controller Protocol: ExpressLRS 2.4G V3
• Camera Tilt: 10°-30°
• Flight Modes: N/S/M Mode
• Flight Time: About 10 mins
• Takeoff Weight (Aquila20 P1): 127±1.0g
• Takeoff Weight (Aquila20 Analog VTX): 122±1.0g
• Compatible goggles: VR04 HD, VR04
• Compatible radio transmitter: LiteRadio 4
• Firmware compatibility note: BETAFPV devices should be updated to firmware version V2.0.5 or later for third-party ArtLynk protocol equipments compatibility
• Firmware update note: The air unit needs to be updated via the ground station
• Firmware version note: firmware V2.0.5 is not compatible with any V1 versions (V1.0.36 / V1.0.44)

Package Contents:

• 1x Aquila20 Brushless Whoop Quadcopter (Analog/P1 Air Unit Version)
• 1x Aquila20 Exclusive Battery 2S HV 1100mAh
• 1x 2S HV Battery Charger and Voltage Tester with BT3.0 Connector
• 4x Gemfan 2218 3-Blade Propellers
• 1x Prop Removal Tool
• 1x Cross Screwdriver
• 1x 4Pin Adapter Cable
• 1x USB Type-C Adapter Board