Happymodel Crux3 1S 3 Inch Toothpick FPV Racing Drone BNF (ELRS / FRSKY / DSM Receiver)
Happymodel Crux3 1S 3 Inch Toothpick FPV Racing Drone BNF (ELRS / FRSKY / DSM Receiver)
Product Type: Unknown Type
Brand: Happymodel
Frame Size: 75mm
Protocol: DSM2
Protocol: DSMX
Protocol: ELRS
Protocol: FRSKY
Brand: Happymodel
Frame Size: 75mm
Protocol: DSM2
Protocol: DSMX
Protocol: ELRS
Protocol: FRSKY
Specifications:
- Motor Mode: EX1202.5 KV11500
- Configu-ration:9N12P
- Stator Diamter:12mm
- Stator Length:2.5mm
- Shaft Diameter: 1.5mm
- Motor Dimension(Dia.*Len): 14mm*14.5mm
- Weight(g):4.4g
- No.of Cells(Lipo):1S
- Propellers Gemfan 75mm
- Center Thickness:5mm
- Prop Diameter:75mm
- Center Hole diameter:1.5mm
- Pitch:0.9in
- Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000(SPI connection)
- Original whoop size compatible
- Power supply: 1S battery input (DC 2.9V-4.35V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G VTX
- Built-in SPI ExpressLRS 2.4GHz receiverBuilt-in 5V 1A BECFlight controller
- Firmware target: CRAZYBEEF4SX1280
- Onboard 4in1 ESC MCU upgraded to EFM8BB21
- Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_H_5_REV16_7.HEX
- Default protocol: DSHOT300
- Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- RF Frequency: 2.4GHzAntenna : SMD antenna
- Telemetry output Power: <12dBmReceiver protocol to flight controller: CRSFCould bind with All ExpressLRS 2.4GHz TX module , ExpressLRS firmware need 1.0.0 or latest
- Onboard 5.8g VTX Output power: 25mw~200mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA(type)
- Frequency: 5.8GHz 5bands 40 channels
- With Race bandSmartaudio ready
- Caddx ANT 1200tvl camera Image Sensor: 1/3³ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC or PAL
- IMAGE: 16:9 or 4:3
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio : >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm
- Min. Illumination: 0.001Lux@F1.2
- Auto Gain Control: YES
- BLC: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14*14mm(with bracket to 19*19mm)
- Wide Power Input: DC 3.7-18V
- Work Temperature: -20 Degrees~+60 Degrees
- Weight: 2g (N.W.)
Package Contents:
- 1x Crux3 Frame and canopy
- 1x ELRS F4 2G4 flight controller built-in SPI ExpressLRS 2.4G receiver
- 4x appymodel EX1202.5 KV11500 brushless motor
- 1x Gemfan 75mm bi-blade Propellers(4cw+4ccw)
- 1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera
- 1x 5.8G 25mw~200mw 40ch vtx (Flight controller built-in)
- 1x Screw Driver
- 1x Propeller disassemble tool
- 1x 3D Printed Camera Holder
- Happymodel Handbag