- Home / RTF Drones /
- Happymodel Bassline 2S Micro FPV Racer Drone BNF (ELRS / FRSKY / AFHDS
Brand: Happymodel
Features: FPV System Included
Features: HD Video
Frame Size: 90mm
ELRS - In Stock
FRSKY - In Stock
AFHDS-2A - In Stock
Advanced Micro FPV Racer: The Happymodel Bassline is a cutting-edge micro FPV racer drone designed for exhilarating and fast-paced flights, providing thrilling racing experiences in a compact form factor.
Multiple Receiver Options: Available in BNF (Bind-N-Fly) edition with your choice of receiver (ELRS, FRSKY, and FLYSKY), making it easy to integrate with your preferred transmitter for seamless control.
Impressive Performance: Equipped with powerful brushless motors and efficient electronic speed controllers (ESCs), the Bassline delivers impressive performance, allowing for rapid acceleration, tight turns, and agile maneuvers during flight.
FPV Installed: The Bassline includes an integrated FPV systeam ready to go so you can jump right into the action. It features a high-quality camera and video transmitter for real-time live video feed, enabling immersive first-person view flying and capturing captivating aerial footage.
Bassline 2S Micro Racer Features:
- X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
- VTX Power up to 400mw
- Support ELRS V3.0 (Need to upgrade firmware)
- Powerful EX1103 KV11000 motors
- CaddxFPV Ant FPV camera
- Recommend 2S 350mah/450mah/550mah/650mah battery (Not include)
- Battery tray size: Maximum support for batteries with a width of approximately 17mm and a height of approximately 13mm
Bassline 2S Micro Racer Specifications:
- Brand Name: Happymodel
- Item Name: Bassline 2S 2inch Micro FPV toothpick drone
- Wheelbase: 90mm
- Size: 115mm*115mm*40mm
- Analog version Weight: 40gram
- Receiver Options:
- 2.4G ELRS SPI
- SPI Frsky D8/D16
- SPI Flysky
Motor Features:
- Mode: EX1103 KV11000
- Configu-ration:9N12P
- Stator Diamter:11mm
- Stator Length:3mm
- Shaft Diameter:Φ1.5mm
- Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
- Weight(g):3.8g
- Voltage: 1-2S LiPo
Propellers Features:
- Weight:0.88g
- Material: PC
- Pitch:2.3inch
- Props Dia:52.17mm
- Center Thickness:5mm
- Center Hole Dia:1.5mm
Flight Controller Features:
- X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
- X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
- X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS
- X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: ICM20689 or ICM42688P(SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) Blheli_S 4in1 ESC
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G OpenVTX 0mw~400mw
- Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
- Built-in voltage detection
- Built-in current sensor
Onboard 4in1 ESC Features:
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite programmable
- Default Factory firmware: Z_H_30_REV16_7.HEX
- Default protocol: DSHOT300
- Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver Specifications:
- Packet Rate option: 50Hz/150Hz/250Hz/500Hz
- ExpressLRS Firmware version: V2.0
- RF Frequency: 2.4GHz
- Antenna : SMD antenna
- Telemetry output Power: <12dBm
- Receiver protocol: SPI ExpressLRS
- Compatible with ExpressLRS V2.0 TX Module
- Couldn’t flash separately ExpressLRS firmware
- Could flash FC firmware to support ExpressLRS v3.0 TX module
Onboard SPI Frsky D8/D16 receiver Version Specifications:
- SPI BUS receiver Frsky D8/D16 compatible
- Compatible Non-EU transmitter D8/D16 model
- Channels: 8/16 compatible
- SPI BUS receiver
- Protocol: AFHDS-2A
- Channels: 14ch (AFHDS-2A)
Onboard 5.8g OPENVTX Features:
- Firmware version: OPENVTX
- Smartaudio v2.1
- PIT Mode support
- RCE Mode support
- Channels:48ch
- Transmitting Power: 0/RCE/25mw/100mw/400mw
- Power supply: DC 5V
- Current (5v): <650ma (400mw)
ANT 1200tvl camera Features:
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC or PAL
- IMAGE: 16:9 or 4:3
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio : >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm
- Min. Illumination: 0.001Lux@F1.2
- Auto Gain Control: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14*14mm(with bracket to 19*19mm)
- Wide Power Input: DC 3.7-18V
- Weight: 2g (N.W.)
Package Contents:
- 1x Happymodel Bassline 2s Micro FPV Racer (Assembled, Bind-N-Fly)
1