Happymodel BNF Mobula8 2S 85mm Brushless Whoop BNF (UART ELRS, SP1 ELRS, FRSKY D8 Receiver)

Happymodel recently released the Mobula8 UART ELRS versions. This model features the new X12 ELRS Pro v1.1 flight controller, with an onboard VTX and UART ELRS receiver controlled by an ESP32 chip. This configuration provides a free UART set and allows you to flash a single ExpressLRS firmware for the Mobula8 ELRS.

Features:

• X12 ELRS Pro v1.1 5-IN-1 AIO flight controller built-in 2.4G ELRS V3.0 and OPENVTX
• VTX Power up to 400mw
• ELRS V3.0 (Default), could flash elrs firmware for the receiver by wifi
• EX1103 KV110000 motors
• CaddxFPV Ant FPV camera
• Smooth and powerful
• Compatible for 1S-2S Lipo/LIHV battery
• Recommend 2S 450mah/550mah/650mah battery (Not include)

Specifications:

• Brand Name: Happymodel
• Item Name: Mobula8 UART ELRS 2S 85mm Micro FPV whoop drone
• Wheelbase: 85mm
• Size: 120mm*120mm*50mm
• Weight: 43g

Brushless Motors Specifications:

• Mode: EX1103 KV11000
• Configu-ration:9N12P
• Stator Diamter:11mm
• Stator Length:3mm
• Shaft Diameter: 1.5mm
• Motor Dimension(Dia.*Len): 13.5mm*15.5mm
• Weight(g):3.8g
• No.of Cells(Lipo):1-2S

Propellers Specifications:

• Weight: 0.88g
• Material: PC
• Pitch: 2.3 inch
• Diameter: 52.17mm
• Center Thickness: 5mm
• Center Hole Diameter: 1.5mm

Flight Controller Specifications:

• X12 ELRS Pro v1.1 AIO 5-IN-1 Flight controller
• MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
• Sensor: ICM42688P(SPI connection)
• Mount hole size: 25.5mm*25.5mm
• Power supply: 1-2S battery input (DC 2.9V-8.7V)
• Built-in 12A(each) Blheli_S 4in1 ESC
• Built-in Betaflight OSD(SPI Control)
• Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
• Built-in UART ExpressLRS v3.0.0
• Built-in voltage meter sensor , voltage meter scale 110
• Built-in current meter sensor , current meter scale 470

Onboard 4in1 ESC Specifications:

• Power supply: 1-2S LiPo/LiPo HV
• Current: 12A continuous peak 15A (3 seconds)
• Support BLHeliSuite programmable
• Firmware target: Z_H_30
• Default protocol: DSHOT300
• Bluejay firmware ready

Onboard 5.8g OPENVTX Specifications:

• Firmware version: OPENVTX
• Smartaudio v2.1
• PIT Mode support
• RCE Mode support
• Channels:48ch
• Transmitting Power: 0/RCE/25mw/100mw/400mw
• Power supply: DC 5V
• Current (5v): <650ma (400mw)

Caddx ANT 1200tvl Camera Specifications:

• Image Sensor: 1/3³ CMOS Sensor
• Horizontal Resolution: 1200 TVL
• TV System: NTSC or PAL
• IMAGE: 16:9 or 4:3
• Synchronization: Internal
• Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
• S/N Ratio : >52dB (AGC OFF)
• Video Output: CVBS
• Lens: 1.8mm
• Min. Illumination: 0.001Lux@F1.2
• Auto Gain Control: YES
• WDR: Global WDR
• DNR: 3D DNR
• Dimensions: 14*14mm(with bracket to 19*19mm)
• Wide Power Input: DC 3.7-18V
• Weight: 2g (N.W.)

Package Contents:

• 1x Happymodel Mobula8 Micro Whoop FPV Drone
• 1x Spare Canopy
• 1x Propeller Removal Tool
• 1x OSD Programmer
• 4x Spare Propellers