If you're looking to get FPV ready with one of your drones, look no further than this kit as it includes some great features that make it stand out! This kit offers a stand-alone FPV monitor with built in 40 channel receiver, audio, and internal battery, the video transmitter is designed to mount easily inside your drone, and the system offers crisp, clear and vivid images in daylight, while still being able to view objects without difficulty under low light. 

M-EV100 5.8GHz FPV Goggle Features:

• Support AV Input and Output
• Support External HDMI to AV Module
• Support External DVR module
• Diversity Supported Antennas
  
• Adjustable IPD 58~68mm
• Auto Search function, can auto search all frequencies and select the channel of strongest signal.
• Has 3 Racing Modes : 4/6/8 pilots. 60-80MHz interval between adjacent channels greatly decrease interference.
• Has Debug Mode, requires a corresponding VTX which support pitmode and extra frequency 5300MHz

• Frequency : 5.8G 5333Mhz-5945Mhz
• Sensitivity : <=-93dB
• Antenna Impedance : 50Ω
• Antenna Gain : 3dBi
• Antenna Connector : RP-SMA
• Video Format : NTSC/PAL
• Support AV IN/OUT
• Brightness/Contrast Adjustment
• Support Firmware Upgrading
• Power Input : 7.4V
• Low Voltage : 6.8V
• Battery : 2S 7.4V 1000mAh
• Charging : USB Cable(not included)
• Working Temp. : -10℃-+40℃

• Resolution  : 480x320
• FOV : 28° diagonal

• Clean powerup and channel switching without interference to others
• Beltflight/Cleanflight/iNav OSD setting of power, bands, channels and Pitmode
• Overheating protection in case of premature damage.
• Additional protection allows for powering up without antenna
• Pitmode(power is set to OFF) - test and set your quad without interference to others
• Channel changes and Pitmode setting through PWM
• 2-6S input power supported
• 5V BEC output for camera, RC receiver
• 36x36 mm Standard size ; 30.5x30.5 mm mounting holes

• Model: EWRF E709TM3
• Frequency: 5.8G 48CH
• Transmitting Power: 25mW/200mW/600mW/OFF
• Power supply: DC 6-25V (2-6S)
• Supply current12V: 140mA@25mW /250mA@200mW /300mA@600mW
• Power output: DC 5V (800mA max)
• Antenna impedance: 50 ohm
• Antenna connector: MMCX Female( RP-SMA Male Pigtail)
• Weight: 8 g
• Dimension: 36*36*7.65 mm
• Mounting Hole: 30.5mmx30.5mm

• Resolution: 700TVL
• Signal: Analog NTSC
• Mounting: Standard

• 1 x Mini 5.8G 40CH FPV Goggles
  Note: FPV Goggles may be white or black unless a color is specifically requested.
  
• 1 x 700TVL FPV Camera
• 1 x E709 5.8G Video Transmitter
• 1 x 5.8G 4dBi Clover Antenna Set
• 2 x RP-SMA 3dBi Antenna
• 1 x User Manual