Brand: SpeedyFPV
ESC Output: 30A
Flight Controller: F4
Frame Size: 450mm
Motor Size: 2212
This F450 package includes everything needed to assemble a powerful 450-class drone for fun or photography. Each kit includes the frame, motors, electric speed controllers, power distribution board, power hookup cables with bullet connectors, and flight controller.
With the powerful F4 flight controller, unlock tons of autopilot and pre-programmed potential with a variety of software and GPS options (not included).
This is a time-tested and proven platform for aerial craft.This version of the Q450 features integrated PCB connections for direct soldering of your ESCs. This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy. The V3 also comes with stronger molded arms over V1 and V2, so no more arm breakage at the motor mount on a hard landing.
2212 1000KV 3S Brushless Motor Specifications:
- KV: 1000
- Operating Voltage: 2-3S
- Recommended Prop: 1045
- Load Current (@11.1V): 15A
- Pull (@11.1V): 885g
- Efficiency (@11.1V): 5.1g/w
- Weight: 47g
10x4.5 Propellers (Set of 8) Specifications:
- Material: ABS (Acrylonitrile Butadiene Styrene)
- Size: 10 x 4.5 inches
- Compatibility: F450 Quadcopter Frame
- Color: Black + Red
- Quantity: Set of 8 propellers
- Mounting: 5mm
- Efficiency
- Stability
- Noise Reduction
- Application: General-purpose heavy lift efficiency propellers
F4 NOXE V3 F411 Flight Controller with OSD Specifications:
- Model: F4 NOXE V3
- Main control (MCU): STM32F411CEU6/100 MHz
- Sensor: BMI 270/Gyro/Accel
- Video Overlay (OSD): AT7456E
- Input voltage: Input voltage: 2S-6S (7.4V-26V)
- 5V-BEC: 5V/2.5A ± 0.1V
- 10V-BEC: 10V/2A+0.1V
- Compatible Receivers (receivers): ELRs (CRSF), TBS (CRSF), SBU, IBU, DS M2, DS MX
- HD interface: yes
- UART: UART 1, UART 2
- LIC: IIC1
- LED strip: yes
- Buzzer (buzzer): support 5V active
- ESC signal (ESC signal): PWM, Oneshot125, Oneshot42, Multishot,
- Dail 150, Dail 300, Dail 600
- USB: Micro USB
- Current terminal] (current port): Yes
- Voltage sensor (voltage sensor): Yes
- Dfu button (dfu button): Yes
- Firmware (Firmware): Betaflight_4.3.0 JHEF 411.HEX
- Size: 27*27*5mm
- Mounting hole: 20*20*3mm
- Weight (weight): 4.3g
Q450 V3 450mm Quadcopter Drone Frame with Integrated Power Distribution Features:
- Built from quality glass fiber and polyamide nylon.
- Integrated PCB connections for direct soldering of your ESCs
- Pre-threaded brass sleeves for all of the frame bolts.
- Colored arms for orientation to keep you flying in the right direction.
- Large mounting tabs on main frame bottom plate for easy camera mounting.
- Easy assembly.
Q450 V3 450mm Quadcopter Drone Frame with Integrated Power Distribution Specifications:
- Width: 450mm
- Height: 55mm
- Weight: 270g (w/out electronics)
- Motor Mount Bolt Holes: 16/19mm
Package Contents:
- 1x F4 NOXE V3 F411 Flight Controller
- 1x Q450 Frame Kit
- Evolution PRO Mode 2 Controller (White)
- 1 x TGY-iA6C Receiver (with leads)
- 4x 2212 1000KV 3S Brushless Motors
- 4x Readytosky 30A Brushless ESCs
- 4x 10x4.5" Propellers Clockwise
- 4x 10x4.5" Propellers Counter-Clockwise
- 1x Power Connector (XT60) Harness
- 1x Flight Controller Wiring Harness
- 1x Wiring Diagram
10